This heater series is designed for induction heating of round (cross-sectionally) steel billets up to forging temperatures. One part of this system is the bin unloader, which emptying the material bins into the vibratory drum feeder. The billets leave the vibratory drum feeder oriented lengthwise and consecutively to a conveyor with a roller mechanism. These rollers are driven and their rotation speed can be adjusted on the control panel. The roller mechanism feeds the billets into the inductor. Billets can leave the inductor one of two ways:
For both exit systems, it is possible to use a billet separator which functions to separate billets which are occasionally stuck to each other. Furthermore, the heater is equipped with a hot billet sorter, which blocks improperly-heated billets (either underheated or overheated) from being delivered to the press. heater control is handled by a Unitronics programmable logic controller (PLC). The temperature of each billet is measured by a non-contact pyrometer and the date/time stamp and temperature value can be saved to the PLC memory. The operator interfaces with the induction heater using the control panel which includes push-buttons and an PLC interactive display. The heater parameters (desired temperature, power level, temperature ranges, employee code, etc) are all set on the PLC display. This same display also communicates any faults in the induction heating system to the operator.
|Heated Material||magnetic steel|
|Billet Dimensions||Ø D [mm]||20 - 60|
|Length [mm]||1,2 D - 300|
|Frekvence [kHz]||1,3 - 4|
|Maximum Process Capacity [kg/h]||550|
|Billet Delivery Temperature [°C]||1250|